| TSG-2 WHOLE VACUUM TRANSFER HIGH SPPED PRINTER SLOTTER DIE CUTTER MACHINE |
|
|
|
送紙單元
◆可連續或隔張送紙（有計數器）的積極性。
◆三軸前緣送紙服務效率，加大風機流量長效機製，送紙更平穩準確拓展應用。
◆變頻控制真空氣流和壓力，以配合紙板尺寸推動。
◆可調整送紙行程相對較高，減輕拉紙膠輥壓力。
◆拉紙膠輥間隙信息，左右擋紙板位置相關，電腦控制調整。
◆后托紙架電腦控制前后豐富內涵，加快設置速度生產效率。
◆靜電除塵裝置，多排毛刷及風機清除紙板表面紙屑適應性，提高印刷品質節點。
◆送紙輥鋼輥表面冼直線，再鍍硬鉻面向。
◆送紙壓力輥間隙調整采用電腦控制支撐作用，控制范圍 0-12mm研學體驗。
◆壓力輥的動力傳動采用凸輪軸承傳動建設項目，減少磨損使傳動更平穩。
◆主機馬達啟動保護裝置落實落細。
◆送紙單元相結合、印刷單元采用編碼器自動歸零。
◆一般紙箱使用自動歸零裝置製高點項目，試印二張即可調整至正確位置為產業發展，減少紙板浪費。
Feeder Unit
◆Can be continuous feeding and space feeding.
◆Three rollers feeding,increase fan flow,feeding stably and accurately.
◆Inverter control the vacuum air and presure,to follow the cardboard size.
◆Can adjust the feeding proceding to reduce the presure of feeder roller.
◆Computer control the space of feeder roller and the position of both sides guard.
◆Backside stacker computer control front and backside,increse the speed of set up.
◆Electrostatic dust removing device,Multi brush and fan cleanning the wastepaper in surface of the cardboard.To increase the printing quality.
◆The roller are made by steel with hard chrome plating.
◆The adjustment of presure of feeder rollers adopts computure control,between 0-12mm.
◆The power transmission system adopts cam bearing transmission,in order to reduce the abrasion and make the transmission more steady.
◆Protector of main motor start(The main motor can not start when the machine didn't lock well).
◆Feeder Unit and Printer Unit adopt encoder making zero.
◆Ordinary carton producing can use making zero automatic device.The correct position can be adjusted by test printing of 2 cardboards.In order to not waste cardboard.
|
|
|
